Expert Answers about Kia Trailer Hitch
- American-Made Trailer Hitch for 2012 Acura MDX
- I'd recommend the Curt Class III Trailer Hitch, part # 13354. Curt manufactures their hitches in the USA. Draw-Tite is an American owned company, but their hitches are manufactured in Mexico.
If you'll be using the hitch for towing purposes, you'll need a few more parts to complete your towing system:
Trailer wiring harness with 4 pole trailer connector, part # 118424
Ball mount, part # 2923
Trailer ball, part # 19261 for a 1-7/8 inch or # 63845 for a 2 inch.
view full answer... - Where is Draw-Tite Trailer Hitch Receiver For 2000 Dodge Ram Pickup Made
- The Draw-Tite Max-Frame Trailer Hitch Receiver # 75101 you were looking at is designed in the USA but produced in Mexico.
If you are wanting a trailer hitch receiver made in the USA I have a few options.
I recommend the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25132 as it is the only USA made trailer hitch receiver for your 2000 Dodge Ram Pickup that does not require drilling and will fit both long and short bed models with the standard or step rear bumper.
If you are ok with an...
view full answer... - Where Are The Curt Trailer Hitch Receivers For a 2023 Toyota Highlander Manufactured?
- Both our Curt Trailer Hitch Receivers # C99FR & # C45CR for your 2023 Toyota Highlander are made in the USA. The # C45CR has an exposed cross tube and the strength to allow for use with a weight distribution hitch. The # C99FR has a hidden cross tube and the design prevents the use of a weight distribution hitch but is a better looking receiver if you only need to use for carrying hitch mounted accessories or towing small utility trailers. Typically a weight distribution hitch is only going...
view full answer... - Which Trailer Hitch Receiver Locking Hitch Pins are Made in the USA
- Out of our available locking hitch pins, the etrailer, Roadmaster, InfiniteRule, Demco, and Blue Ox locks are made in the USA. Assuming you have a 2" hitch I recommend the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel # e98882. This hitch lock fits standard 2" hitches and has a span of 2-5/8". It comes with 2 keys and as previously stated is made in the USA.
I have attached a review video for your reference.
view full answer... - Where is the Draw-Tite Hitch for a 2007 Ford F-150 Made
- The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75506 which is a fit for a 2007 Ford F-150 is made in Mexico. If you are looking for a USA option, the Curt Trailer Hitch Receiver part # C13360 is the way to go. If you need a trailer connector to go along with the trailer hitch, the Curt T-Connector Vehicle Wiring Harness part # C56031 is plug-n-play.
view full answer... - What is the Country of Origin for Curt Trailer Hitch Ball # C40030
- The Curt trailer hitch balls are all made in China. Many trailer hitch receivers too are made outside the U.S. but Curt does manufacture their hitches stateside.
The 2-5/16-inch hitch ball you referenced, Curt # C40030, has a 15K gross trailer weight capacity. For a comparably-rated 2-5/16-inch chrome-plated ball that is made here in the U.S. you can use B&W part # BWHB94004. This is rated for 30,000-lbs. Its shank is 1-1/4-inches in diameter and 2-1/2-inches long.
view full answer... - Is the Hidden Hitch Trailer Hitch Extender # he18 Solid or Hollow
- The Hitch Extender, # he18, is hollow at both ends so that would be tubular steel. The use of a hitch extender will reduce the capacity of the trailer hitch by 50 percent. If the hitch started with a 350 pounds tongue weight capacity, by using this extension that amount will be reduced to 175 pounds.
view full answer... - Is the etrailer.com 2 inch Trailer Hitch Receiver Lock Made in the USA
- The 2 inch Trailer Hitch Receiver Lock, item # e98880 is assembled in the U.S.A.
These are some of the most secure receiver hitch locks on the market. I have included a video review for you.
view full answer... - Front Mount Trailer Hitch for a 2018 Ford F-350 that is Made in the USA
- Draw-Tite currently manufacturers their trailer hitches, including # 65076, in Mexico. Curt manufacturers their hitches in the US. For a 2018 Ford F-350 the Curt front hitch is # C31078.
view full answer... - Trailer Hitch Made in USA and Wiring Recommendation for a 2016 Subaru Outback
- Draw-Tite trailer hitch # 75673 for the 2016 Subaru Outback is made in Mexico. Curt trailer hitch # C13206, also for your 2016 Subaru Outback, is made in the USA. But, per Curt warranty requirements, all non-trailer loads (bike racks, cargo carriers, etc) must be supported by stabilizing straps, such as # 18050, sold separately. So if you are going to be using the hitch for anything other than towing you would need the strap.
If you are going to do some towing I recommend etrailer ball...
view full answer... - Origin for Curt Trailer Hitch # 13542 for a 2006 Ford Freestyle
- The Curt trailer hitch # 13542 for the 2006 Ford Freestyle is made in the US. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip and a carrying bag. For trailer wiring use # 118395. I have included some instruction and video links for the wiring as well.
view full answer... - Hitch Extender For 2 Trailer Hitch Receiver has a Hollow Shank
- The shank on the Hitch Extender For 2 inch Trailer Hitch Receiver 14 inches, item # HE12, is solid steel.
view full answer... - Highest Capacity Frame Mounted Trailer Hitch for RV
- The trailer hitch with the most capacity is the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 which has a towing capacity of 5,000 lbs and tongue weight capacity of 500 lbs. This will work on box frames, C-channel frames, or I-beam frames that are between 22" and 66" wide.
I have added a link to a video review of this hitch for you to check out as well.
view full answer... - What is the Texans Hitch Cover for 2 Inch Trailer Hitches Made Out OF
- The Houston Texans NFL Trailer Hitch Receiver Cover, # FTH190SL, is made of metal and enamel. There is no plastic on this hitch cover.
view full answer... - 5th Wheel Trailer Hitch Made in the USA for 2017 GMC Sierra 3500 Long Bed w/Factory Puck System
- The Curt 5th wheel trailer hitches including # C16069 are not made in the US. For a 5th wheel hitch that fits your 2017 GMC Sierra 3500 long bed AND that is made in America you can use B&W hitch # BWRVK3700. I have linked a video review of this hitch for you.
view full answer... - Country of Origin of Trailer Hitch Receivers for a 2011 Nissan Rogue
- There are 4 trailer hitch receivers that will fit the 2011 Nissan Rogue. Both Draw-Tite Hitches, # 75902 and # 36542, are made in Mexico and the Curt hitches, # C13204 and # C12122, are made in the US.
view full answer... - Where are Trailer Hitches for 2019 Toyota Highlander Made
- The Curt Trailer Hitch Receiver part # C13394 which is a fit for a 2019 Toyota Highlander is made in the USA. This hitch provides a class III 2" receiver tube opening.
view full answer... - What Metal is the Rapid Hitch Trailer Hitch Lock # AM3492 Made of
- I went and pulled a Rapid Hitch Trailer Hitch Lock # AM3492 from our warehouse and determined that the ends of the locks are aluminum and the middle section is stainless steel.
view full answer... - What is the Shipping Weight of the Draw-Tite Max-Frame Trailer Hitch Reciever
- The shipping weight on the Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is 37 lbs. If you are planning on towing or carrying a bike rack, I would be happy to recommend a bike rack, trailer wiring, ball mount, and tow ball if you can let me know how you intend to use your hitch.
Included is an installation video for this hitch on a 2019 Subaru Crosstrek.
view full answer... - Are Hitches Available for a 2008 Volvo XC90 Made with Square or Round Tube
- All the hitches we offer for your 2008 Volvo XC90 use square tube construction. No drilling, trimming or vehicle modification will be required, the hitch bolts to existing holes in the vehicle. The nice thing about the design of the hitch is that the cross tube is concealed behind the bumper, so the receiver tube is the only visible portion of the hitch.
The two hitches available are pretty similar, visually speaking but the Draw-Tite # 75152 has a higher tongue weight capacity (maximum...
view full answer...
Go To Results